Among those professional wrapped bronze bushing with through holes tsb-092 manufacturers in China, welcome to buy customized and low price bronze through holes bushing, bronze bearing bush, wrapped bronze bushing or get its free sample from our factory.
Wrapped bronze bushing with through holes TSB-092
STRUCTURE: Bronze bearings made of CuSn8 with through-holes
MICROSECTION:
CuSn8 with composition (Sn:8%, P<0.05%, Cu:Rest)
TECHNICAL DATA:
Max. Load P | Static |
120 N/mm2 |
|
Dynamic |
40 N/mm2 |
||
Max. sliding speed V(m/s) |
2.5 m/s |
||
Max. PV factor (N/mm2.m/s) |
2.8 N/mm2.m/s |
||
Operating Temperature |
Max. Greased |
150°C |
|
Max. Oil lubricated |
250°C |
||
Coefficient of friction |
0.06~0.15μ |
||
Surface roughness (Ra) |
≤ 0.8 µm |
||
Surface hardness |
Normal |
>200 HB |
|
For longer service life |
>350 HB |
CHARACTERISTICS:
Bearing material CuSn8 made of solid bronze strip with perforation for lubricated applications.
Good wear resistance, suitable for rough conditions.
Optimum performance under relatively high loads and low speeds.
These holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement and reduce the frication.
TYPICAL APPLICATIONS: Wrapped bronze bushing with through holes TSB-092 is suitable for high load, lower speed application like construction, transport and agriculture machinery etc.